a table frame, consisting of 4 sturdy legs of flat section with forged feet, riveted to the bow & hoop braces at lower and mid points, and to a hoop rolled on edge at the top.
-metal – the sheet metal table surface is crimped to the hoop
-timber – the wooden surface is secured to the hoop with screws
stone -the stone surface rests on the hoop
design – derived from café table, hope 1995
please note: configuration of planks will vary according to timber availability.
not available to buy online
please fill in our request a quote form.
metal components are hot dip galvanised, but unpainted.
they are bright and silver when new, but soon assume a soft lead grey colour as they age. they will show traces of white rust as the zinc oxidises. this finish is recommended for furniture in close proximity to the sea.
metal components are acid-dipped and left to oxidise (rust).
they are brushed down and coated with a wax sealer to prevent brush off marks. this finish will leave rust marks on paving and is not recommended for coastal situations.
sustainably forested timber
jarrah – 22mm/32mm
an australian timber which is a highly regarded hard wood, renown for its use in extreme conditions outside.
extremely stable and naturally resistant to boring insects.
dark reddish brown to light brown and pink in colour
it will assume a silver grey colour similar to that of teak in approx. 18 months, when left untreated and exposed to the elements.
optional oiling – pronature outdoor oil is available to purchase if you would like to oil your timber.
electro galvanised steel with powder-coated top
only available on ø750, ø900 and ø1200
painted finishes also available – view colours here